Xerox 7024 - Manual (Page 44)

DIALUNG
To enter pauses in one touch or speed dial numbers
A pause may be included anywhere in the one touch or speed
dial numbers by pressing the pause or dash key.
A pause should be entered whenever a delay is required
between numbers such as when dialling 9 for an outside line or
using charge code numbers.
The dash key should be used for an undetermined delay
between numbers such as waiting for a dial tone when dialling
through a PBX system.
If Pause is pressed, displays.
If dash [ - ] is pressed twice, "!" displays.
To set one touch keys 01-24 (Menu 05, Feature 1)
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10 SELECT/ENTER
2. Press [0], [5], [Enter].
ONE-TOUCH 01 TO 24
SELECT AND PRESS
3. Press the desired one touch key.
(;01]=NOTHING STORED
SELECT/ENTER
If desired number is displayed, press [Select] and go to step 6.
If NOTHING STORED is displayed, press [Enter] and go to
step 5.
If an undesired number is displayed, press [Clear] and go to
step 5.
[01]=TEL. NUMBER
5. Use the terminal keypad to enter the telephone number (up
to 40 characters). When the telephone number is correct,
press [Enter].
[01]=SET PARAMETERS
SELECT/ENTER
6. If the Forced 4800 or Secure Send options are not desired,
press [Select] and go to Step 11.
If the Forced 4800 or Secure Send options are desired, press
[Enter].
FORCED 4800: OFF
SELECT/ENTER
2-2 TELECOPIER 7024 USER HANDBOOK