Xerox 7024 User Manual
Page 77
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SENDING
16.
if you want the operation to Start immediately, press
[Enter].
If you want a specific start date and time, enter using the
terminal keypad.
•
Enter the desired date and press [Enter].
•
Enter the hour, in 24 hour format, and press [Enter].
•
Enter the desired minutes and press [Enter].
RELAY SEND
COMPLETED
Note: If you requested transmission from memory, the terminal
will scan the document into memory. If you reach a memory full
condition, press [Enter] within one minute to store all scanned
originals. Any partial page will be deleted. Press [Clear] to
delete all the stored originals. Failure to respond within one
minute results in the cancellation of the job and an error
message report will be printed.
If a specific time was entered, the display will flash DELAY START
PENDING.
TELECOPIER 7024 USER HANDBOOK
3-13