Xerox 7024 User Manual

Page 50

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DIALLING

Use the terminal keypad to enter the telephone number (up

to 40 characters). When the telephone number is entered,

press [Enter],

[P1]=SET PARAMETERS

SELECT/ENTER

If the Forced 4800 or Secure Send options are not desired,
press [Select] and go to step 12.

If the Forced 4800 or Secure Send options are desired, press
[Enter].

FORCED 4800:

OFF

SELECT/ENTER

8. Press [Select] to display the desired setting; ON or OFF.

9. Press [Enter] to store the setting.

SECURE SEND:

OFF

SELECT/ENTER

10. Press [Select] to display the desired setting; ON or OFF.

11. Press [Enter] to store the setting.

[P1]=L0CATI0N ID

SELECT/ENTER

12. If desired name is displayed, press [Select] and go to step 15.

If LOCATION ID is displayed, press [Enter] and go to step 13.

If an undesired name is displayed, press [Clear] and go to

step 13.

Note: The two digit number in the display represents the
number of characters entered.

ABCDEFGHIJ.

2-8

TELECOPIER 7024 USER HANDBOOK