Long original, To set long original (menu 01, feature 1), Long original -17 – Xerox 7024 User Manual
Page 81: Toset long original (menu 01, feature 1) -17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SENDING
Long original
The long original option enables documents longer than 35.4
inches (900mm) to be scanned and transmitted.
There are two options available on the terminal: ON and OFF.
If ON is selected, the length of the document to be scanned can
be unlimited length.
If OFF is selected, the length is limited to 35.4 inches.
The long original feature automatically deactivates after the
transmission.
To set long original (Menu 01, Feature 1)
1. Press [Menu] to select the menu table.
l.SEND OPTIONSl
01-10
SELECT/ENTER
2. Press [Enter] to select long original.
l.LONG
original
MODE
1-3
SELECT/ENTER
3. Press [Enter].
LONG ORIGINAL; OFF
SELECT/ENTER
4. Press [Select] to select ON or OFF.
LONG ORIGINAL:
ON
SELECT/ENTER
5. Press [Enter] when the desired setting is displayed.
LONG ORIGINAL MODE
COMPLETED
6. Refer to the desired send procedure.
TELECOPIER 7024 USER HANDBOOK
3-17