Copies (selected reduction), Copies (selected reduction) -3 – Xerox 7024 User Manual

Page 91

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

COPYING

Copies (Selected reduction)

1. Load the originals with the printed side down. Press [Select]

to select the resolution. Press [Original] to select the

contrast, if desired.

2. Press [Copy].

ENTER 0 OF COPIES

ENTER/START

3. Use the keypad to enter the number of copies.

ENTER # OF COPIES

ENTER/START

4. To select the reduction rate, press [Enter].

REDUCTION RATE: AUTO

SELECT/START

5. Press [Select] to cycle through the available reduction rates;

AUTO, 100%. 97%, 91 %, 81 % or 75%.

REDUCTION RATE: AUTO

(01)

SELECT/START

6. When the desired rate is displayed, press [Start].

COPYING

Note: If the memory overflows, an alarm will sound and a
message will be displayed.

•

Pressing [Enter] will store the originals scanned before the
memory overflowed.

•

Pressing [Clear] or [Stop] will delete all the stored originals.

•

Doing nothing for one minute will store the originals

scanned before the memory overflowed and begin copying.

Any partial page will be deleted.

TELECOPIER 7024 USER HANDBOOK

4-3