Xerox 7024 - Manual (Page 74)

SENDING
Relay send
This feature allows your terminal to function as an initiating
station for a relay send transmission.
Relay send allows your terminal to send a document to a Xerox
compatible relay station which can resend that document to one
or more remote terminals. This allows faster distribution to
multiple terminals at lower telephone rates. For example, the
initiating terminal calls the relay station one time at the long
distance rate, and the relay station then calls the destination
stations at the local rates.
Using the relay send feature requires careful coordination
between the relay station and the initiating station. The relay
station must first set up the destination dial directory numbers
for the initiating station.
The relay station must also provide you with a password.
This feature can be programmed to delay transmission up to one
month from the current date.
Basic Networking Concept
To set relay send (Menu 02, Feature 3)i________________
1. Load the originals with the printed side down. Press [Select]
to select the transmission resolution. Press [Original] to
select the contrast, if desired.
OIAL/PRESS COPY
STD NORM
1. The original(s) must be loaded in the ADF to access this feature.
3-10 TELECOPIER 7024 USER HANDBOOK