Xerox 7024 - Manual (Page 141)

PROBLEMSOLVING
Error Messages Tables and Error Codes
ERROR MESSAGES
NO RESPONSE FROM
REMOTE MACHINE
RESEND BAD PAGES
SEE ERROR MESSAGES
PLEASE TRANSMIT
AGAIN
SOLUTION
Communication with the remote machine was not possible. This
message can be caused by calling an older Group 1 machine that
is not compatible with your fax, reaching a fax machine that is
broken or out of paper, or dialling a wrong number. Use the fax
telephone handset to call the number manually. Ask the remote
operator to check the remote fax.
Poor telephone line conditions have occurred. Call the remote
location and request that the document be transmitted again.
If sending or copying an original longer than 36 inches, set Long
Original feature ON.
Your transmission may not have been completed. Poor
telephone line conditions, a document feeder jam or problems
at the remote machine may have been the cause. The number of
pages transmitted may be less than the number of pages set for
transmission. Try the transmission again.
Polling was attempted by an unauthorized remote terminal.
The terminal is out of recording paper, imaging film or the
document has jammed.
Memory capacity exceeded.
ERROR CODES
D.0.0
T.1.1
T.1.4
T.2.1
T.2.2
T.2.3
T.7.1
T.7.3
R.1..1
R.1.2
R.1.4
R.2.3
R.3.1
R.3.2
R.3.3
R.3.4
R.4.2
R.5.1
R.7.1
R.7.2
R.7.4
T.4.2
T.5.1
T.1.2
T.3.1
T.4.1
T.5.2
T.5.3
R.2.2
R.4.1
R.4.4
TELECOPIER 7024 USER HANDBOOK 8-3