EVCO c-pro CLIMA sistema Installer manual - Manual (Page 69)

C-PRO CLIMA SISTEMA INSTALLER MANUAL
Page 69
Important parameters:
MCZN: Installer menu
General parameters Local zones nr.
MCZN: Installer menu Zones Zona A(B) Delivery line
MCZN: Installer menu Zones Zone A(B) Terminal units
MCZN: Installer menu Zones Zone A(B) Sensor type
MCZN: Installer menu Zones Zone A(B) T. probe pos.
MCZN: Installer menu Zones Zone A(B) Reg. type
MCZN: Maintenance Menu Zone A(B) Maintenance Regulation enablings Temperature
MCZN: Maintenance Menu Zone A(B) Maintenance Temp. regulation Hysteresis
9.1.3 Zone work set-point (MCZN module)
The zone work set-point is decided depending on the work mode, manual or automatic (with
programmed weekly time bands), always using the Vgraph zone display.
For the types of work set-point acceptable and for their settings, consult the c-pro CLIMA system
user manual.
Other possibilities also exist to change the work set-point established via Vgraph in the modes listed
below:
9.1.3.1 Variation of the zone work set-point for "climatic curves" (MCZN, MCCT
modules)
By activating the work set-point variation function for “climatic curve”, depending on the external
temperature it is possible (available on the MCCT regulator) to vary the active zone work set-point
value within the minimum and maximum limits that can be set from parameter, in order to adapt the
room temperature to the external climatic conditions, as follows:
- set the minimum and maximum external temperature limits specific for summer functioning
and winter functioning, within which the variation function of the room set-point is active
- the room work set-point minimum and maximum variation values are set
- set the direction of the compensation if direct or inverse for increase or decrease
compensation of the work set-point.
Important parameters:
MCZN: Maintenance Menu
Zone A(B) Maintenance Regulation enabling T. Ext set var.
MCZN: Maintenance Menu Zone A(B) Maintenance T.ext set variation MinTExt S
MCZN: Maintenance Menu Zone A(B) Maintenance T.ext set variation MaxTExt S
MCZN: Maintenance Menu Zone A(B) Maintenance T.ext set variation MinTExt Set S
MCZN: Maintenance Menu Zone A(B) Maintenance T.ext set variation MaxTExt Set S
MCZN: Maintenance Menu Zone A(B) Maintenance T.ext set variation ModeTExt Set S
MCZN: Maintenance Menu Zone A(B) Maintenance T.ext set variation MinTExt W
MCZN: Maintenance Menu Zone A(B) Maintenance T.ext set variation MaxTExt W
MCZN: Maintenance Menu Zone A(B) Maintenance T.ext set variation MinTExt Set W
MCZN: Maintenance Menu Zone A(B) Maintenance T.ext set variation MaxTExt Set W
MCZN: Maintenance Menu Zone A(B) Maintenance T.ext set variation ModeTExt Set W