EVCO c-pro CLIMA sistema Installer manual - Manual (Page 54)

C-PRO CLIMA SISTEMA INSTALLER MANUAL
Page 54
MCZN zone regulator it is associated and the features of the serial communication parameters both
CANbus (c-pro CLIMA controllers network) and Modbus (towards the RICS supervision system or
other BMS systems).
Entering the CO2 menu, it is possible to define the main/construction features relative to the CO2
sensor used, enabling or not the presence and defining the minimum and maximum calibration
values.
Entering the DEHUMIDIFYER menu, it is possible to define the main/constructive features relative
to the type of dehumidifiers managed and enabling or not of the control probes on the limit
temperatures on dehumidifier input.
Finally the PASSWORDS menu allows to display and modify the 3 password levels present in the
application.
7.5 On/Off pages
By accessing the ON/Off page of the MCDE regulator, there is the possibility to view the state of
the regulator.
When the 60 seconds time-out has passed or by pressing ESC, the controller will go back to the
display of the main page.
7.6 System Network page
Accessing the System Network page of the MCDE regulator, it is possible to access the regulator
application for MCZN zone regulator connected to it or go back to the display of the MCCT
thermal power plant regulator as follows:
By pressing ESC key, the controller will go back to the main display of the MCCT thermal power
plant controller.