EVCO c-pro CLIMA sistema Installer manual - Manual (Page 5)

C-PRO CLIMA SISTEMA INSTALLER MANUAL
Page 5
1 GENERALITIES
1.1 Description
The c-pro CLIMA Climatic Modules allow to realise innovative control and regulation networks in
distributed logic, for air-conditioning and heating systems in residential and commercial buildings,
characterised by the most demanding and modern necessity for environmental comfort, system
performance and energy savings.
The Climatic Modules are programmable controllers dedicated specifically to the regulation of the
different parts of the systems:
• c-pro Mega MCCT, for THERMAL POWER PLANT, where there is a boiler, chiller
and/or heat pump present with relative delivery pumps and safety devices.
• c-pro Micro MCZN, for the various ZONES, where it is necessary to control the regulation
of the temperature and humidity in the room, via heated or cooled floors and dehumidifiers.
• c-pro Micro MCDE, can manage the most different types of DEHUMIDIFIERS for every
zone, which also have integration and support systems for heating and/or cooling the room.
• c-pro Micro MCPS, dedicated to the management of the glycoled circuit of the SOLAR
HEAT PANELS and for the circuit of the heating and/or domestic hot water with DHW
tank.
Other specific components of the CLIMA system are dedicated for the completion of the
requirements of every conditioning and heating system:
• Vgraph, ZONE TERMINALS for the user, which allow to display and set the temperature
and room humidity values, the alarms and the time band of each zone.
• EVSET, ZONE SET VARIATOR not displayed, with temperature probe on board, able to
modify the room temperature in order to reach maximum well-being.
• Flow switches, air quality probes (and CO2), temperature and immersion humidity probes,
channel or room.
Some features of the Climatic Modules and the components of the c-pro CLIMA system must be
highlighted:
• Flexibility: allows to design and realise the correct and convenient regulation and control
solution for every type of building, thanks to the capacity of the modules to adapt to the
needs of every type of system.
• Modularity: allows to insert the number and type of modules and components necessary to
satisfy the requirements of every user and every different and specific new system to be
realised, obtaining complete stability of the application software, which must not be realised
or modified for very new system that a plant engineer must build (possibility of modifying
or developing software, which being programmable controllers remains in all cases).
• capacity of communication among modules and some components, via the CANbus field,
which makes the realisation of distributed control network possible in the building, instead
of the traditional centralised system. This has the important and fundamental result of
reducing realisation times and costs of the electric wiring of the air conditioning and heating
system.