EVCO c-pro CLIMA sistema Installer manual - Manual (Page 26)

C-PRO CLIMA SISTEMA INSTALLER MANUAL
Page 26
There are also 2 LEDs present.
- associated to the ESC key, it identifies the machine state
Off: with machine off.
On: with machine on.
- associated to key K0, it identifies the presence or not of alarms
Off: no alarm present.
Flashing: with alarms present.
4.2 Navigation through the applications making up the system
The c-pro mega MCCT controller represents the heart of the c-pro CLIMA system, also from a user
interface point of view.
To access the other system components, the procedure given in the following paragraphs must be
followed.
4.2.1 Access a c-pro micro MCZN zone regulator
To access one of the c-pro micro MCZN zone regulators present in the system, access the
“Regulators state in serial network” page present in the “States” section and select the regulator to
which access is to be made from the list of regulators available.
4.2.2 Access a regulator for additional c-pro micro MCDE dehumidifiers
Access to the regulators for additional c-pro micro MCDE dehumidifiers takes place from the
MCZN application connected to it. Therefore, not directly from the MCCT thermal power plant
regulator.
From the main menu of the MCZN regulator, access the "system network" page and select the
MCDE regulator available. The system will automatically access the regulator for additional
dehumidifiers associated to the zone controller from which the loading control originated.
4.2.3 Access the regulator for c-pro micro MCPS solar panels
To access the regulator for c-pro micro MCPS solar panels present in the system, the “Solar panels
functioning state” page must be accessed, present in the “States” section and select to access the
MCPS regulator (if configured).