Elektron Octatrack - Manual (Page 83)

TRACKS
71
LFO MAIN
Here the speed and depth settings of the three track LFOs are found. LFOs are always
synced to the tempo of the Octatrack. Press the [LFO] button to access this page.
SPD1 sets the speed of LFO1. The higher the value the faster the LFO runs. For LFO
speed synchronised to straight beats, try settings of 16, 32 or 64. Note that the MULT set-
tings in the LFO SETUP menu affect the LFO speed settings. The SPD1 setting is reflected
by the SPD setting found in the LFO1 page of the LFO SETUP menu.
SPD2 sets the speed of LFO2. This setting is reflected by the SPD setting found in the
LFO2 page of the LFO SETUP menu.
SPD3 sets the speed of LFO3. This setting is reflected by the SPD setting found in the
LFO3 page of the LFO SETUP menu.
DEP1 sets the modulation depth of LFO1. This setting is reflected by the DEP setting found
in the LFO1 page of the LFO SETUP menu. See page 71 for a more detailed description of
the modulation depth parameters.
DEP2 sets the modulation depth of LFO2. This setting is reflected by the DEP setting found
in the LFO2 page of the LFO SETUP menu.
DEP3 sets the modulation depth of LFO3. This setting is reflected by the DEP setting found
in the LFO3 page of the LFO SETUP menu.
LFO SETUP
This page contains more detailed settings for the three LFOs. Open the LFO SETUP menu
by either pressing [FUNCTION] + [LFO] or quickly double pressing [LFO].
In the column to the left there are three identical pages for the three track LFOs, plus one
LFO designer page.
To edit the behavior of an LFO, navigate to the corresponding page by using the [UP]/
[DOWN] arrow buttons. The track LFOs feature six setup parameters.
PMTR chooses the parameter the LFO will modulate. LFOs can only modulate parameters
found in the TRACK PARAMETER MAIN pages. When selecting the parameter that will be
modulated the TRACK PARAMETER page it belongs to are shown above the parameter
name.