Elektron Octatrack - Manual (Page 156)

SUMMARY OF BUTTON COMBINATIONS
144
[FUNCTION] + [TRIG 9..16] will when no RECORDING mode is activated manually trig tri-
gless trigs instead of sample trigs. This is only relevant when TRACKS or CHROMATIC trig
mode is active.
[FUNCTION] + [TEMPO] makes it possible, through repeating [TEMPO] button presses, to
tap the BPM of the sequencer.
[FUNCTION] + [REC] will perform a copy command. The content that will be copied
depends on the currently active menu or mode of the Octatrack.
[FUNCTION] + [PLAY] will perform a clear command. The content that will be cleared
depends on the currently active menu or mode of the Octatrack.
[FUNCTION] + [STOP] will perform a paste command. The content that will be pasted
depends on the content that was copied.
[FUNCTION] + [UP]/[DOWN] will increase the scrolling speed in various menu lists.
[FUNCTION] + [UP]/[DOWN] will when no scrollable menu is active change the active
TRIG mode.
[FUNCTION] + [LEFT]/[RIGHT] will while in GRID RECORDING mode nudge trigs back or
forth one step.
[FUNCTION] + [ENTER/YES] will preview the selected sample through the main outputs
while in the audio editor, the Flex or Static sample slot lists or the file browser.
[FUNCTION] + [EXIT/NO] will for as long as held remove all parameter locks from the
active track while in LIVE RECORDING mode.
[FUNCTION] + LEVEL will adjust the MAIN parameter of the MIXER menu.
[PATTERN] + [TRIG] will select the active pattern.
[PATTERN PAGE] + [REC] will copy the active pattern page.
[PATTERN PAGE] + [PLAY] will clear the active pattern page.
[PATTERN PAGE] + [STOP will paste a copied pattern page to the active pattern page.
[SCENE A/B] + [TRIG] will assign a scene to the selected scene slot.
[TRACK] + [PLAY] will trig the sample assigned to the machine of the track.
[TRACK] + [STOP] will stop playback of the sample assigned to the machine of the track.
[TRACK] + [BANK] will open the sample assigned to the track in the audio editor.
[TRACK] + [AUDIO RECORD AB/CD] will initiate sampling from the audio inputs.
[TRACK] + [MIDI] will initiate sampling of the audio tracks.
[TRACK] + [ENTER/YES] will re-arm any one shot recorder trigs of the track whose
[TRACK] key was pressed.