Spatializer, Spatializer main, Spatializer setup – Elektron Octatrack User Manual
Page 173: Spatializer main spatializer setup

B-8
Appendix B: EFFECTS REFERENCE
SPATIALIZER
The spatializer effect is suitable for affecting the stereo image in various ways, for example by widening
it. It is also capable of generating a psuedo-stereo image from a mono sample.
SPATIALIZER MAIN
INP adjusts the gain of the dry signal.
DPTH sets the depth of the widened signal.
The parameter works in conjunction with the
WDTH control.
WDTH sets the amount of stereo spread. The
parameter works in conjunction with the DPTH
control.
HP controls the cutoff frequency of the high
pass filter for the widened signal.
LP controls the cutoff frequency of the low
pass filter for the widened signal.
SEND adjusts the level of the widened signal.
SPATIALIZER SETUP
PHSE reverses the phase of the wet signal for:
none of the channels (NONE), the left channel
(L), the right channel (R) or both the left and
right channel (L,R).
M/S activates/deactivates the MG and SG con-
trols.
MG controls the amount of mid gain.
SG controls the amount of side gain.