Elektron Octatrack - Manual (Page 175)

B-10 Appendix B: EFFECTS REFERENCE
DYNAMIX COMPRESSOR
The Dynamix processor can be used for increasing the overall sound level of a track or pattern. It can
also be used to enhance or reduce transients.
COMPRESSOR MAIN
ATK sets the attack time from 0.5 ms to 100
ms.
REL sets the release time from 50 ms to 5 s.
THRS controls the compressor knee threshold.
RAT sets the compression ratio between 1:1
and 1:255.
GAIN can be used to adjust the output level of
the compressor.
MIX adjusts the output between the uncom-
pressed dry signal and the compressed wet
signal.
COMPRESSOR SETUP
RMS adjusts the way the compressor works. A
zero setting makes the compressor look for
amplitude peaks and a max setting makes it
react to the over-all energy level of the signal.