Elektron Octatrack - Manual (Page 45)

PROJECTS
33
CUE MUTES TRACK will when checked combine the cue and mute functions.
When a track is being cued it will at the same time automatically be muted.
DISABLE FUNCTION + ENCODER will when checked disable all functions that nor-
mally occur when [FUNCTION] is held and an encoder turned.
DISABLE YES/NO ARM will when checked disable the one shot trig arming and dis-
arming when simply pressing [ENTER/YES] or [EXIT/NO]. Note that when this arm/
disarm functionality is disabled, the same functionality can be achieved by pressing
[FUNCTION] + [ENTER/YES] or [FUNCTION] + [EXIT/NO]. Read more about one
shot trigs in section “ONE SHOT TRIGS” on page 79.
DIS. STOP-STOP ARM will when checked disable one shot trig arming when double
pressing [STOP] while the sequencer is stopped.
DIS. PAGE AUTOCOPY will when checked no longer auto copy existing trigs when
extending the length of a track or pattern. Read more about how to change pattern
and track length in section “SCALE SETUP” on page 92.
DEFAULT TRIG MODE selects the default track trigging mode when creating new
projects. Read more about the modes in the section “PATTERN SETTINGS MENU”
on page 89.
DEFAULT REC MODE selects the default trig mode for the track recorders when
creating new projects. Read more in the section “RECORDING SETUP MENUS” on
page 48.
SAVE SAMPLES TO offers two settings.
• AUDIO POOL will when saving recorded audio or saving samples in the
audio editor save the data to the audio pool of the set.
• PROJECT DIRECTORY will when saving recorded audio or saving samples
in the audio editor save the data to the project folder.
SHORT SAMPLE NAME controls how samples will be abbreviated when loaded to
the Flex and Static sample slot lists.
• BEG+END will combine the five first characters of the file name with the five
last characters. This is the default option.
• BEG ONLY will show the first ten characters of the sample name.
• END ONLY will show the last ten characters of the sample name.
RECORD QUICK MODE will when activated alleviate the need to press a [TRACK]
key in combination with the [AUDIO RECORD] keys to initiate manual sampling.
Instead, pressing the [AUDIO RECORD] keys will directly initiate manual sampling
for the track recorder of the active track, making one handed sampling operation
possible. This quick mode of sampling works a bit different when sampling internal
sources. Pressing [MIDI] will only initiate sampling when the RECORDING SETUP
menus are active. If these menus are not active, MIDI mode will be accessed when
the button is pressed. Read more about manual sampling in the section “MANUAL
SAMPLING” on page 52.