Control – Elektron Octatrack User Manual
Page 47
PROJECTS
35
PASTE will paste a copied file or folder.
CUT is accessed when holding [FUNCTION]. Will cut a selected file or folder.
•
Be very careful when working within the file manager. If the wrong files are acci-
dentally deleted or renamed projects can be ruined.
•
By copying a bank file to another project you can create a project featuring your
favorite banks. Note that only sequencer data, parts, scenes and parameter set-
tings will be copied when copying a bank file. No samples will be copied and the
machines assigned to the tracks will refer to the same Flex and Static sample slot
positions as before. Hence you might need to load the samples used by the cop-
ied bank to empty Flex and Static sample slots of the new project and assign
these sample slots to the correct machines of the tracks.
FORMAT CARD formats the card. Once selected and [ENTER/YES] is pressed a
prompt will appear, asking if the operation should proceed. Press [ENTER/YES] to
format the card. Note that all information on the card will be lost and any partitions
gone.
STATUS is a menu where information relating to the OS, battery and Compact Flash card
is found.
CONTROL
Here various track and sequencer settings can be modified.