Elektron Octatrack - Manual (Page 18)

PANEL LAYOUT AND CONNECTORS
6
26. [PATTERN PAGE] selects the active pattern page when GRID RECORDING mode is
active. Above the [PATTERN PAGE] key four LEDs are found.
They are used for indicating the pattern page currently being played or edited. If for
example 64 steps, or four pattern pages, are used in a pattern, all four LEDs will be lit.
For scale lengths up to 16 steps, the <1:4> LED will stay lit and pressing [PATTERN
PAGE] will have no effect. [FUNCTION] + [PATTERN PAGE] opens the SCALE
SETUP menu where track length and time signature settings are made.
REAR CONNECTORS
The Octatrack rear connectors:
1. Power on/off switch.
2. 6V DC power in.
• Caution! Use only the bundled PSU-2 with your Octatrack. It can, using an appro-
priate power cord, be used all over the globe without the need of voltage con-
verters. Using the wrong type of adapter may damage your unit. Damage caused
by the use of incorrect power supply is not covered by warranty. Please see
“TECHNICAL INFORMATION” on page 145 for details about the Octatrack power
supply.
3. Hi Speed USB 2.0 connection.
4. Compact Flash card reader.
5. MIDI Thru.
6. MIDI Out.
7. MIDI In.
8. Input C/D.
9. Input A/B.
10. Cue out L/R.
11. Main out L/R.
12. Headphones output.