Changing a backup profile, Removing a profile – Storix Software SBAdmin User Guide User Manual
Page 64
Storix System Backup Administrator
64
Version 8.2 User Guide
Changing a Backup Profile
The information for an existing profile may be changed by selecting
Configure
!Backup Profiles
from the menu
bar. The
will then appear. Either enter the name of the profile in the field at the top of the
screen or select the arrow button to the right of the entry field and select an existing profile from the list.
The profile settings will then be displayed. Simply add or change any of the information on the screen, then
press the
Save
button at the bottom to save the changes.
Removing a Profile
A profile may be removed from the system only if it is not assigned to any backup jobs. If it is assigned to a job,
you will be informed so, and you must
to use a different backup profile before the
current profile may be removed.
To remove a profile, select
Configure
!Backup Profiles
from the menu bar, enter or select the profile to remove,
and then press the
Remove
button at the bottom of the screen.