Storix Software SBAdmin User Guide - Manual (Page 102)

Select the button next to the client and backup type you wish to display. An additional list of specific backup
dates for the selected client and backup data will be shown:
Note that the color of the button represents whether the backup was successful (green) or failed (red). The
Job ID, date and time, and a list of clients on the media are displayed for each label in the list. To display a
label, select a specific run date from the list. The label will be displayed (
see above ). If you want to return
to the client list to select a different client, press the Go Back . Otherwise press the cancel button to close
this window.
Read from Server (Media)
If you have a backup tape with no physical label and are unsure of its contents, the backup label may be
read from the media and displayed on the screen. This option may also be used to view the backup label
associated with a disk backup image file. To do so, follow these steps:
1. Insert the tape in the drive, then select View !Backup Labels!Read from Server (Network Edition)
or View !Backup Labels!Read from Media (Workstation Edition). A window similar to the
following will display:
Storix System Backup Administrator 102 Version 8.2 User Guide