Storix Software SBAdmin User Guide - Manual (Page 33)

To add a new client, enter the hostname of the client in the entry field at the top. Note that the hostname
you enter may be a simple hostname (i.e. LinuxServer), a full domain name (LinuxServer.storix.com) or IP
Address as known to the
admin system . Then select any optional features that apply to this client. The
optional features will only be selectable if you have installed a software license for that feature. If so, you
may select the option for only the number of clients the feature is licensed for. When you’ve made your
selections, select the
Save button.
When adding the client you may also want to configure a disk , NFS mount , or tape Local System Backup
Device. See Configure a Local System backup to create a backup job directly to this client’s locally
attached disk, NFS mount, or tape drive.
To change an existing client, you may type the client name in the Client Hostname/IP field, or use the
arrow button to the right of the field to select from a list of configured clients. You may then select or
deselect optional features, or remove the client.
Configure a TSM Client (node)
If the client to be added is a TSM node and you want to back this client up to a TSM server, select the TSM
Client Backup button. Keep in mind, however, that the number of TSM clients which may be added is
dependent on the number of TSM clients the administrator is licensed for. When selecting this option,
additional options will appear on the screen as shown below:
Storix System Backup Administrator 33 Version 8.2 User Guide