Welch Allyn Acuity and Mobile Acuity LT Central Monitoring Systems - User Manual - Manual (Page 85)

Directions for use Chapter 4 Adjust monitoring settings and patient information 81
Add or remove a note in a patient’s Waveform Window
If you would like to attach a note or reminder to a patient’s Waveform Window, such as
when the patient temporarily moves to another location, you can enter the information in
the Patient ID Setup window
The note remains in the Waveform Window until you remove it, even during wireless
dropout.
Always remove a patient note when it is no longer relevant, to ensure that proper patient
care is delivered.
To add or remove a note in a patient’s Waveform Window
1. Click the patient’s map icon or Waveform Window icon.
The patient’s Virtual Monitor appears.
2. Click Setup, Patient ID.
The Patient ID Setup window appears.
3. Add or remove a note.
• To add a note, scan or type up to 20 characters on the Patient Note line.
Carefully check your note.
• To remove a note, use the Backspace key on your keyboard.
4. Click Confirm.
The information is stored.
5. Click Close.
Note Patient notes that are entered when the monitor is not connected to the network
will not be displayed on secondary or remote Virtual Monitors. Only the most
recent patient note will be displayed when the monitor reconnects to the
network.
Patient Note