Welch Allyn Acuity and Mobile Acuity LT Central Monitoring Systems - User Manual - Manual (Page 54)

50 Chapter 4 Adjust monitoring settings and patient information Welch Allyn Acuity Central Monitoring System
Coordinate system print jobs and central station printers
This section presents the Acuity Central Station Printer window, from which you can
coordinate printers and pending print jobs for the entire Acuity System.
To coordinate print jobs
1. On the Acuity Central Station map where the Acuity Central Station icon is located,
click
.
The Print Jobs view of the Central Station Printer window appears.
2. Click a print job to highlight it.
3. Click any of these buttons:
• Click Print Next to print the job next.
• Click Delete, and then Delete Selection to delete the print job.
To coordinate printers
1. Click .
The Printers View appears.
2. Do any of these things:
• Read messages to check printer status.
• Click a printer to highlight it, and then click Disable to disable the printer or
Enable to enable the printer.
Note If appears beside a print job, see Table 18 on page 163 for troubleshooting
information.
Processing
the request
Print next
Alarm print
Printer status