Welch Allyn Acuity and Mobile Acuity LT Central Monitoring Systems - User Manual - Manual (Page 106)

102 Chapter 6 Review or print patient data Welch Allyn Acuity Central Monitoring System
Adjust the content of the tabular list
To adjust the time period covered in the tabular list
1. Click a number under the time line to adjust the line’s scope, in hours.
2. On the time line, click an area in which you are interested (events are red).
The blue box moves. The box indicates the time span covered in the list.
3. Under Time Span, click to specify the number of hours spanned in the list.
The listings change.
To specify the format of the tabular list
1. Next to List Type, click one of these buttons:
• Click Tabular to list tabular data only.
• Click Events to list events only.
• Click Both to list tabular data and events.
2. Check vital-sign boxes to list corresponding data and events.
The number of events that occurred in the time span appears beside each box.
3. Under Tabular Interval, click to specify the frequency interval at which data are listed.
For example, 15 min means that readings are listed four times during each hour (e.g.
12:00, 12:15, 12:45 and 1:00). However, all events in the time-span are listed, in bold.
Time line