Welch Allyn Acuity and Mobile Acuity LT Central Monitoring Systems - User Manual - Manual (Page 192)

188 Chapter 11 Specifications Welch Allyn Acuity Central Monitoring System
Acuity System customizable defaults and factory defaults
Acuity System default settings appear in Acuity System windows upon patient monitor
connection, when a patient’s window is first opened.
There are two types of Acuity System default settings:
• Customizable default settings: Settings that can be customized to match your clinical
workflow model, at the point of installation.
• Factory default settings: Settings that are shipped from the factory. These settings
cannot be changed.
Hardware specifications for Acuity System components are listed in the manufacturers’
manuals.
Specifications published in this manual are subject to change.
Central Station windows
Table 30. Acuity Central Station Printer window
Features Customizable default Factory default
Printing order of print requests 1. Print Next
2. Alarm Prints
3. All other printout requests, in the
order received
Maximum allowable number of
print requests in a print queue
40
Printout deletion order When the number of print requests in the
queue exceeds the default, the deletion
order from the queue is:
1st deletes the oldest print requests
(other than alarm or Print Next) in a group
of printout requests for a patient
Then deletes the oldest alarm prints in a
group of printing requests for a patient
Then deletes the oldest “Print Next”
requests in a group of printing requests
for a patient
Table 31. Patient List window
Features Factory default
Sort order ID, currently monitored patients at top
Length of time review information
remains accessible 24 to 96 hours after patient discharge from Acuity System monitoring,
depending on Full Disclosure option