Welch Allyn Acuity and Mobile Acuity LT Central Monitoring Systems - User Manual - Manual (Page 126)

122 Chapter 6 Review or print patient data Welch Allyn Acuity Central Monitoring System
12-lead printouts
You can perform 12-lead ECG interpretation and create printouts through the Welch Allyn
1500 Patient Monitor.
Types of 12-lead printouts
• Average beats, 3x4 plus rhythm strip
• Average beats, 6x2 plus snippets for V1 through V6
• Automatic (sequential) 3x4 plus rhythm strip
• Automatic (sequential) 6x2
• Automatic (simultaneous) 3x4 plus rhythm strip
• Automatic (simultaneous) 6x2
Print a 12-lead ECG printout
To print a 12-lead printout
1. Run a 12-lead analysis using the Welch Allyn 1500 Patient Monitor.
Once the analysis is completed, the 12-lead report automatically prints at the Acuity
System printer.
2. If a re-print of the last 12-lead analysis is needed, place the cursor under printer icon
at the Waveform Review Window or the Graphical Trends Review Window.
Click Print and select Print Report.
A printout occurs at the Acuity System printer.
Note The 12-lead ECG interpretation measurements are not saved on the monitor and
are printed out at the Acuity System printer. However, Acuity will support re-
printing of the 12-lead reports. Files are saved for 96 hours.
Note The 12-Lead printouts in the 6x2 formats can print both Standard lead sequences
and Cabrera lead sequences. The 3x4 format always prints a Standard lead
sequence.