Welch Allyn Acuity and Mobile Acuity LT Central Monitoring Systems - User Manual - Manual (Page 198)

194 Chapter 11 Specifications Welch Allyn Acuity Central Monitoring System
Presets values Alarm limits:
1.0 mm
Alarm level: Low
Measurement Offset: Auto
Print on Alarm: Off
Clicking the ST RELEARN
button System relearns a patient’s normal ECG rhythm and
uses the relearned rhythm as a guideline to analyze
deviation of the ECG ST-segment offset.
Establishes a new ST reference beat without
changing the normal ECG rhythm used for arrhythmia
analysis.
In ST Analysis Setup window: The waveform slice
displays NO VALID BEATS, and the Acuity System
can take up to 30 seconds to update the waveform.
Relearn and Learning Done event markers ( ▼)
appear in most review windows and some printouts.
Table 37. Setup window — Printouts
Features Customizable default Factory default
Vital signs that initiate central alarm print HR
Central auto print time interval Off
Vital signs that initiate Central OxyCRG alarm print Off
Priority of vital signs alarming simultaneously for alarm
prints Order listed in window
Table 38. Setup window — Waveform-Window
Features Customizable
default Factory default
Number of vital signs checked at once Up to two, but only one
ECG at once
Priority order of displayed vital sign boxes 1. ECG 1 4. P3 7. RESP
2. P1 5. P4 8. SpO
2
3. P2 6. CO
2
9. NIBP
Table 36. Setup window — ST Analysis
Features Customizable default Factory default