Welch Allyn Acuity and Mobile Acuity LT Central Monitoring Systems - User Manual - Manual (Page 143)

Directions for use Chapter 9 Status icons 139
Patient/monitor status icons and recommended action
This table illustrates these things about patient/monitor status icons:
• Display priority
• Location on the central station map
• Messages at the top of the Acuity Central Station screen
• Messages in message panels (when present)
• Recommended action
Table 8. Icons and messages that represent patient and monitor status
Patient/monitor
status icon Icon display
priority Icon location on map Messages in
hallway message
panels and at top
of Acuity Central
Station screen Recommended action
Port Icon
Locations representing
unused ports available
for monitoring Acuity
System patients. None When you are ready, begin
monitoring from this
location.
Monitor Connecting
Locations representing
monitors establishing
communication with
Acuity System. None Wait until communication
is established before you
open the Virtual Monitor
or Waveform Window.
Monitor Disconnecting
Locations representing
monitors disconnecting
from Acuity System. None If you have pressed the
NET OFF key, unplug
monitor from Acuity
System within 15 seconds
or Acuity System
reconnects.
Patient Intentionally
Disconnected
Locations representing
monitors from which
patients have been
intentionally
disconnected.
This icon also appears
during Manual NIBP-Only
monitoring and spot
SpO2 monitoring, but
does not affect alarming
at Acuity.
None If communication between
the patient and Acuity
System is reestablished,
the CONFIRM PATIENT?
prompt appears.
Click YES to reconnect the
original patient to Acuity
System.
Patient Monitoring OK
Beneath alerts
and alarms Locations representing
patients/monitors that
are not in an alarm or
alert state. None
Auto NIBP-Only
Monitoring
Beneath alerts
and alarms Locations representing
monitors that are only
monitoring NIBP,
automatically. None