Elecraft K3 Assembly Manual - Manual (Page 87)

A- 14
E850341 VFO A Bezel Screws Envelope (in Front Panel Hardware Bag)
Do not mix these screws up with other parts in the Front Panel Hardware bag. Confusing them with
other screws nearly the same length may destroy your front panel board. They are packaged separately
for your convenience. You will be instructed when to use each screw in the assembly procedure.
ILLUSTRATION DESCRIPTION QTY
ELECRAFT
PART NO.
Screw, 4-40, 5/16” (7.9 mm) Black, Flat
Head
1 E700027
Screw, 2-56, 1/4” (6.4 mm) Black, Pan
head (See Note Below)
2 E700124
E850340 LCD Bezel Screws Envelope (in Front Panel Hardware Bag)
Do not mix these screws up with other loose parts in the Front Panel Hardware bag. Confusing them
with other screws nearly the same length may destroy your front panel board. They are packaged
separately for your convenience. You will be instructed when to use each screw in the assembly
procedure.
ILLUSTRATION DESCRIPTION QTY
ELECRAFT
PART NO.
Screw, 2-56, 1/4” (6.4 mm) Black, Pan
head
4 E700124
E850301 Power Cable Assembly
Bag with components and separate instruction sheet.