Elecraft K3 Assembly Manual - Manual (Page 84)

A- 11
E850067 Allen Wrench Envelope (in K3 RF Misc Bag)
ILLUSTRATION DESCRIPTION QTY
ELECRAFT
PART NO.
Allen Wrench, 5/64” (in envelope) 1 E980004
Allen Wrench, .050” (in envelope) 1 E980006
E850382 K144XV Side Panel Hardware Envelope (in K3 RF Misc Bag)
ILLUSTRATION DESCRIPTION QTY
ELECRAFT
PART NO.
Screw, 6-32, 1/4” (6.4 mm) Black Flat
Head
3 E700186
Lock Washer, #6, Split Ring 3 E700041
Nut, 6-32 3 E700040
E850399 KSYN3 Envelope (in K3 RF Misc Bag)
ILLUSTRATION DESCRIPTION QTY
ELECRAFT
PART NO.
Screw, 4-40 1/2” (12 mm) Zinc, Pan
Head
2 E700196
Screw, 4-40 3/8” (9.5 mm) Zinc Pan
Head (see note below)
1 E700036
Lock Washer #4, Split 2 E700004
Lock Washer, #4, Inside Tooth
(see note below)
3 E700010
Nut, 4-40 (see note below) 1 E700011
Note: This screw, lock washer and nut are used to secure the stiffener on the KSYN3 PCB (see lower left corner
of KSYN3 image on page A-5). Normally they are already installed. If so, they may not be included in this bag,
or the corresponding parts in this bag are extras.