Elecraft KXPD1 - Manual

Elecraft • www.elecraft.com • 831-763-4211
E
LECRAFT KXPD1 PLUG-IN KEYER PADDLE
Assembly and Operating Instructions
Revision B, July 27, 2011. Copyright © 2011, Elecraft; All Rights Reserved
Introduction
The KXPD1 is a unique plug-in keyer paddle that attaches directly to the Elecraft KX1 portable HF
transceiver. It adds just 1 oz. to total station weight, so it's an ideal solution for backpacking. Use of the
KXPD1 greatly simplifies field operation, whether the operator is sitting on the ground, in a beach chair,
standing, or even reclining. But the paddle is also very effective for use at home or on a picnic table.
The iambic (dual-lever) paddles are angled at 45 degrees for ease of use. Both left- and right-handed
operators can use the KXPD1, since it is physically reversible. The dot/dash lines can also be electrically
reversed, or the paddle set up as a hand key, simply by changing the input device selection (
I N P menu
entry).
A captive thumb screw holds the KXPD1 firmly in place during use. For transport, the paddle can be
quickly removed. Solid silver contacts with protective rubber grips and a rugged, custom mounting bracket
ensure excellent field reliability. After initial set-up, no adjustments are required.
Specifications
Paddle type
Iambic (dual lever)
Contacts Silver, protected by silicone rubber grips
Size 2.7" (L) x 0.8" (W) x 1" (H) (6.8 x 2 x 2.5 cm)
Weight Approx. 1 oz. (30 g)