Elecraft K3 Assembly Manual User Manual

Page 75

A- 2

E850323 KREF3 TCXO Module Bag

ILLUSTRATION DESCRIPTION

QTY

ELECRAFT

PART NO.

KREF3 TCXO Module, 49.380 MHz,
±5 ppm stability

This module is not supplied if you
purchased the optional ±1 ppm module
shown below. .

1 E660033

Tie Wrap, KREF3 TCXO. Module

E980145

KTCXO3-1 TCXO Module Bag

ILLUSTRATION DESCRIPTION

QTY

ELECRAFT

PART NO.

KREF3 TCXO Module, 49.380 MHz, ±1
ppm stability. (optional)

1 KTCXO3-1

Rectangular Insulator attached to the

bottom of the TCXO Module

TCXO spacer (supplied only with
optional KTCXO3-1 module)

1 E980146

Tie Wrap, KREF3 TCXO. Module

E980145

Crystal Filter (in bag)

Standard Filter. Not supplied if you ordered the optional KFL3A-2.8K filter (see below)

ILLUSTRATION DESCRIPTION

QTY

ELECRAFT

PART NO.

KFL3A-2.7K Filter

Note: This filter is not supplied if you
purchased the optional 8-pole 2.8 kHz
filter with your K3 kit.

1 E850249

Screw, 4-40, either 1/4” (6.4 mm) Zinc,
Pan Head. Screw may be inserted into
a threaded bushing in the bottom of the
filter board with the washer below.

1 E700005

Lock Washer, #4, Interior Tooth.

E700010