Dell PowerEdge C6220 II - Manual (Page 325)

5
Jumpers and Connectors | 325
Jumpers and Connectors
This chapter provides specific information about the system jumpers. It
also provides some basic information on jumpers and switches and
describes the connectors on the various boards in the system.
C6220 II System Board Connectors
Figure 5-1. C6220 II System Board Connectors
NOTE: The internal USB connector is used for riser SD interface.
1 PCI-E Gen3 x8 mezzanine slot 3 2 Internal USB connector
3 NVRAM clear jumper 4 SGPIO in connector 2
5 onboard SATA output connector 0 6 onboard SATA connector 4
7 onboard SATA connector 5 8 system battery
9 DIMM slots for processor 1 10 DIMM slots for processor 2
11 SAS/SATA input connector 5 12 middle plane connector
13 front panel connector 1 14 SAS/SATA input connector 0
15 PCI-E Gen3 x16 slot 4 16 SAS/SATA input connector 4