Dell PowerEdge C6220 II - Manual (Page 138)

138 | Using the System Setup Program
Token Setup option Description
48B4 NMI on Error Enables BIOS to generate NMI when PCI-E uncorrectable
errors occur.
48B5 Memory
Operating
Voltage Indicates all DIMMs in the system are operating at 1.25
volts.
48C0 Frequency Ratio Sets frequency multiplier as maximum level.
48C1 Frequency Ratio Downgrades frequency multiplier one level.
48C2 Frequency Ratio Downgrades frequency multiplier two levels.
48C3 Frequency Ratio Downgrades frequency multiplier three levels.
48C8 QPI Frequency Sets the QPI frequency runs at maximum speed.
48C9 QPI Frequency Sets the QPI frequency runs at 4.800GT.
48CA QPI Frequency Sets the QPI frequency runs at 5.866GT.
48CB QPI Frequency Sets the QPI frequency runs at 6.400GT.
48CC QPI Frequency Sets the QPI frequency runs at 7.200GT.
48CD QPI Frequency Sets the QPI frequency runs at 8.000GT.
48D0 Energy Efficient
Policy Controls the energy efficient policy as performance profile
to configure all necessary settings.
48D1 Energy Efficient
Policy Default, controls the energy efficient policy as balance
profile to configure all necessary settings.
48D2 Energy Efficient
Policy Controls the energy efficient policy as low power profile to
configure all necessary settings.
48D3 Direct Cache
Access Disables the Direct Cache Access.
48D4 Direct Cache
Access Enables the Direct Cache Access.
48D8
Load
Customized
Defaults
Requests a customized default of SETUP values on the
next boot.