Dell PowerEdge C6220 II - Manual (Page 137)

Using the System Setup Program | 137
Token Setup option Description
48A3 BMC LAN Port
Configuration Sets BMC LAN Port to Shared-NIC.
48A4 BMC NIC IP
Source Sets BMC LAN to get LAN IP from Static mode.
48A5 BMC NIC IP
Source
Sets BMC LAN to get LAN IP from DHCP mode.
48A6 IPv6 Mode Disables IPv6 internet protocol support.
48A7 IPv6 Mode Enables IPv6 internet protocol support.
48A8 IPv6 AutoConfig Disables IPv6 auto configuration.
48A9 IPv6 AutoConfig Enables IPv6 auto configuration.
48AA Serial Port Mode Console Redirection baud rate will be set to 3,8400 bits
per second.
48AB Flow Control Remote access flow controls by none.
48AC Flow Control Remote access flow controls by hardware.
48AD Flow Control Remote access flow controls by software.
48AE Terminal Type The BIOS console redirection, if enabled, operates in
VTUTF8 emulation model. See also tokens BFh, C0h,
and D7h.
48AF VT-UTF8
Combo Key
Support Disables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
48B0 VT-UTF8
Combo Key
Support Enables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
48B1 Event logging Disables BIOS to log system events to BMC, errors
include ECC/PCI/PCI-E/HT…etc.
48B2 Event logging Enables BIOS to log system events to BMC, errors include
ECC/PCI/PCI-E/HT…etc.
48B3 NMI on Error Disables BIOS to generate NMI when PCI-E
uncorrectable errors occur.