Dell PowerEdge C6220 II - Manual (Page 13)

1
About Your System | 13
About Your System
Accessing System Features during Startup
The following keystrokes provide access to system features during startup.
Note that the hot-keys of SAS/SATA card or PXE support are available in
BIOS boot mode only. There is no hot-key to boot through the UEFI mode.
Keystroke Description
Enters the System Setup program. See “Start Menu” on page 68.
Enters the BIOS Boot Manager. See “Boot Manager” on page 69.
Starts Preboot eXecution Environment (PXE) / iSCSI boot.
Enters the LSI 9210-8i HBA Card or LSI 2008 SAS Mezzanine
Card Configuration Utility. For more information, see the SAS
adapter documentation.
Enters the LSI 9265-8i Card Configuration Utility. For more
information, see the documentation for your SAS RAID card.
Enters the MegaPCLI SAS RAID Management Tool.
Enters the utility to configure onboard LAN settings for PXE
boot. For more information, see the documentation for your
integrated LAN.
Enters onboard SATA Controller’s Configuration Utility.
Enter the Intel iSCSI setup menu.