Dell PowerEdge C6220 II - Manual (Page 102)

102 | Using the System Setup Program
Option Description
(Disabled default) network controller receives a magic packet.
Note: Reboot on WOL feature is opened by
customized, need EEPORM supported.
Embedded Network Devices
Option Description
Embedded NIC1
(Enabled with PXE default) Disabled – Disables the system’s primary embedded
network interface controller.
Enabled with PXE – Enables the system’s primary
embedded network interface controller (full-function),
including its PXE boot-ROM.
Enabled without PXE – Enables the system’s primary
embedded network interface controller, but don’t
enable the NIC’s associated PXE or RPL boot-ROM.