Dell PowerEdge C6220 II - Manual (Page 124)

124 | Using the System Setup Program
Token Setup option Description
01DB Embedded NIC2 Enables NIC2 with iSCSI Remote Boot.
01EA Turbo Mode Disables Intel's processor allows the processor core to
increase its frequency.
01EB Turbo Mode Enables Intel's processor allows the processor core to
increase its frequency.
01F0 Embedded NIC3 Disables the system’s third embedded network interface
controller.
01F1 Embedded NIC3 Enables the system’s third embedded network interface
controller, but don’t enable the NIC’s associated PXE or
RPL boot-ROM.
01F2 Embedded NIC3 Enables the system’s third embedded network interface
controller (full-function), including its PXE boot-ROM.
01F3 Embedded NIC3 Enables NIC3 with iSCSI Remote Boot.
0204 VT for Direct I/O Disables Intel Virtualization Technology for Direct I/O
(VT-d) that enhances I/O support (DMA) when running a
Virtual Machine Monitor.
0205 VT for Direct I/O Enables Intel Virtualization Technology for Direct I/O
(VT-d) that enhances I/O support (DMA) when running
a Virtual Machine Monitor.
0211
Internal USB
PORT
This field disables the internal USB port.
0212
Internal USB
PORT
This field enables the internal USB port.
021F
Maximum
Performance
This will set the Maximum Performance mode in the
system.
0221 OS Control Allows OS to change the P-state.
0224 Embedded
Video Controller The embedded video controller is enabled, and it is the
primary video device.
0225 Embedded
Video Controller The embedded video controller is disabled.
022D Boot Mode Enables booting to Unified Extensible Firmware Interface
(UEFI) capable operating systems.