Yamaha LS9 - Manual (Page 81)

81
7
Oper
ations in the SELECTED CHANNEL section
LS9-16/32 Owner’s Manual
Chapter 7
Operations in the SELECTED CHANNEL
section
This chapter explains how you can use the SELECTED CHANNEL section
and the SELECTED CH VIEW screen to control the parameters of a selected
channel.
The SELECTED CHANNEL section located at the right of the display corresponds to a channel
module of a conventional analog mixer, and allows you to manually adjust all the major parame-
ters of the currently selected channel.
Operations in this section will affect the channel that is currently selected by its [SEL] key. You
can use the encoders and keys on the panel to control mix parameters such as head amp gain,
EQ settings, the threshold setting of the dynamics processors, pan/balance settings, and send
levels to the MIX/MATRIX buses.
For a ST IN channel or STEREO channel, either the L or the R channel is selected, and the
major parameters are linked.
About the SELECTED CHANNEL section
SELECTED CHANNEL section
LS9-16
• If you want to use the SELECTED CHANNEL section to set the send levels to the MIX/MATRIX buses,
use the keys of the MIX/MATRIX SELECT section located at the left of the display.
HINT