Editing the internal effect parameters, Er to “editing, The internal effect parameters – Yamaha LS9 User Manual
Page 170: P. 170), Editing the internal effect parame- ters
170
About the internal effects
LS9-16/32 Owner’s Manual
This section explains how to change the effect type and
edit the parameters.
1
As described in “Mounting a GEQ or effect
in the virtual rack” (
mount an effect in a rack.
A rack in which an effect is mounted will indicate the
effect type used by that effect, and the bypass on/off
status.
1
Effect title/type
B
Bypass on/off status
2
Move the cursor to the rack in which the
effect you want to edit is mounted, and
press the [ENTER] key.
The RACK screen will appear, allowing you to edit the
parameters of the effect.
You can also access the RACK 5–8 screens by repeat-
edly pressing the [RACK 5-8] key.
1
Effect type field
This shows the effect title, the name of the type that is
used, and a graphic. The number of input/output chan-
nels (1 IN/2 OUT or 2 IN/2 OUT) of this effect is also
shown. If you move the cursor to the effect type
graphic and press the [ENTER] key, the EFFECT
TYPE popup window will appear, allowing you to
select the effect type.
B
BYPASS button
This button temporarily bypasses the effect.
C
EFFECT CUE button
This button cue-monitors the output of the currently
displayed effect. This cue function is valid only while
this screen is displayed. The cue will be cancelled
automatically when you switch to a different screen.
D
Special parameter field
This shows special parameters that are specific to
some effect types.
E
Input/output meters
These indicate the level of the signals before and after
the effect.
F
INPUT L/R buttons
These buttons display the OUTPUT CH SELECT
popup window.
G
OUTPUT L/R buttons
These buttons display the INPUT CH SELECT popup
window.
H
Effect parameter field
This area shows parameters for the currently selected
effect type.
3
If you want to change the effect type, pro-
ceed as follows.
1
Move the cursor to the effect type graphic,
and press the [ENTER] key.
The EFFECT TYPE popup window will appear.
Editing the internal effect parame-
ters
1
2
• The EXTERNAL HA screen that appears when you operate
the [RACK 5-8] key is used when you’re using an external
head amp (
HINT
5
7
8
1
4
6
2
3
CLOSE button