Yamaha LS9 User Manual
Page 202
202
Using USB memory to save/load data
LS9-16/32 Owner’s Manual
I
SAVE button
Saves all of the LS9’s internal settings together (
J
LOAD button
Loads the selected LS9 settings file (
K
CREATE USER KEY button
Creates a user authentication key (
L
FORMAT button
Formats the USB memory media (
M
COMMENT/TIME STAMP button
Toggles the item shown at the far right of the file list
between COMMENT and TIME STAMP.
3
Perform the desired editing operation.
For details on the procedure, refer to the explanations
that follow.
● Sorting files and editing file names/
comments
1
In the DISPLAY ACCESS section, press the
[SETUP] key repeatedly to access the USER
SETUP screen.
2
Move the cursor to the SAVE/LOAD button,
and press the [ENTER] key to access the
SAVE/LOAD popup window.
3
To sort the files, move the cursor to the
“FILE NAME,” lock symbol, “FILE TYPE,”
“COMMENT,” or “TIME STAMP” field at the
top of the file list, and press the [ENTER]
key.
The list will be sorted as follows, according to the col-
umn title you selected.
1
FILE NAME
Sort the list in alphanumerical order of file name.
B
Lock symbol
Sort the list according to Write Protect on/off status.
C
FILE TYPE
Sort the list according to file type.
D
COMMENT
Sort the list in alphanumeric order of the comment.
E
TIME STAMP
Sort the list in order of date of creation.
4
If you want to edit the file name or com-
ment, move the cursor to the FILE NAME
field or COMMENT field of each file and
press the [ENTER] key to access the key-
board window.
For details on entering text, refer to “Assigning a
name” (
5
Enter a file name / comment, move the cur-
sor to the RENAME button or the SET but-
ton, and press the [ENTER] key.
6
To turn the Protect setting on/off, move the
cursor to the lock symbol for that file and
press the [ENTER] key.
A lock symbol is displayed for protected files; these
files cannot be overwritten.
1
2 3
4 5
• By pressing the [ENTER] key again, you can change the
direction (ascending or descending) in which the list is sorted.
HINT
• If the COMMENT field is not displayed, use the COMMENT/
TIME STAMP button located at the lower right of the file list to
turn COMMENT on.
NOTE
• You cannot edit the file name or comment of a protected file.
NOTE