Input/output characteristics, Analog input characteristics, Analog output characteristics – Yamaha LS9 User Manual
Page 273
Input/output characteristics
273
LS9-16/32 Owner’s Manual
Appendices
❏ Analog Input Characteristics
*1. Sensitivity is the lowest level that will produce an output of +4 dBu (1.23 V) or the nominal output level when the unit is set to maximum gain. (all fad-
ers and level controls are maximum position.)
*2. XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
* In these specifications, 0 dBu = 0.775 Vrms.
* All input AD converters are 24-bit linear, 128-times oversampling.
* +48V DC (phantom power) is supplied to INPUT XLR type connectors via each individual software controlled switch.
❏ Analog Output Characteristics
*1. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2. PHONES OUT stereo phone jack is unbalanced. (Tip=LEFT, Ring=RIGHT, Sleeve=GND)
*3. There are switches inside the body to preset the maximum output level.
*4. The position of the level control is 10dB lowered from Max.
* In these specifications, 0 dBu = 0.775 Vrms.
* All output DA converters are 24-bit, 128-times oversampling.
❏ Digital Input Characteristics
❏ Digital Output Characteristics
Input/output characteristics
Input Terminals
GAIN
Actual Load
Impedance
For Use With
Nominal
Input Level
Connector
Sensitivity
*1
Nominal
Max. before
clip
INPUT 1-16
INPUT 1-32
-62 dB
3 k
Ω
50-600
Ω Mics &
600
Ω Lines
-82 dBu
(61.6 µV)
-62 dBu
(0.616 mV)
-42 dBu
(6.16 mV)
XLR-3-31 type
(Balanced)
*2
+10 dB
-10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
Output Terminals
Actual Source
Impedance
For Use With
Nominal
Gain Switch
*3
Output Level
Connector
Nominal
Max. before
clip
OMNI OUT 1-8
OMNI OUT 1-16
75
Ω
600
Ω Lines
+24 dB
(default)
+4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR-3-32 type
(Balanced)
*1
+18 dB
-2 dBu
(616 mV)
+18 dBu
(6.16 V)
PHONES OUT
15
Ω
8
Ω Phones
—
75 mW
*4
150 mW
Stereo Phone
Jack (TRS)
(Unbalanced)
*2
40
Ω Phones
—
65 mW
*4
150 mW
Terminal
Format
Data Length
Level
Connector
2TR IN DIGITAL
Coaxial
IEC-60958
24 bit
0.5 Vpp/75
Ω
RCA Pin Jack
Terminal
Format
Data Length
Level
Connector
2TR OUT DIGITAL
Coaxial
IEC-60958
Consumer Use
24 bit
0.5 Vpp/75
Ω
RCA Pin Jack