Yamaha LS9 - Manual (Page 204)

204
Using USB memory to save/load data
LS9-16/32 Owner’s Manual
4
Move the cursor to the MAKE DIR button
and press the [ENTER] key.
A keyboard window will appear, allowing you to enter
a directory name.
For details on entering text, refer to “Assigning a
name” (
→ p. 34).
5
Enter a name for the directory you want to
create, move the cursor to the MAKE but-
ton, and press the [ENTER] key.
If you specified an existing file name, a confirmation
message will appear.
Here’s how to format USB memory media using the
FAT16 file system. USB memory up to 2 Gbytes in capac-
ity is supported.
1
In the DISPLAY ACCESS section, press the
[SETUP] key repeatedly to access the USER
SETUP screen.
2
Move the cursor to the SAVE/LOAD button,
and press the [ENTER] key to access the
SAVE/LOAD popup window.
3
Move the cursor to the FORMAT button and
press the [ENTER] key.
A keyboard window will appear, allowing you to enter
the volume name that will be applied after formatting.
For details on entering text, refer to “Assigning a
name” (
→ p. 34).
4
Enter the volume name, move the cursor to
the FORMAT button, and press the [ENTER]
key.
A dialog box will ask you to confirm the Format oper-
ation.
5
To execute the Format operation, move the
cursor to the OK button and press the
[ENTER] key.
Formatting will require several tens of seconds.
Formatting USB memory media
FORMAT button