Yamaha LS9 - Manual (Page 20)

Top panel
20 LS9-16/32 Owner’s Manual
m
MIX/MATRIX SELECT section
• • • • • • • • •
In this section you can select the MIX channel or
MATRIX channel that will be the object of operations.
1 MIX/MATRIX [1]–[16] keys
These keys select the MIX channel (or if the selected
channel is a MIX/STEREO/MONO channel, the
MATRIX channel) whose send level will be adjusted by
the SELECTED CHANNEL section. The LED of the key
corresponding to the currently selected channel will light
(or blink, in the case of a MATRIX channel).
In SENDS ON FADER mode, these keys select a MIX bus
or MATRIX button as the send-destination. In this case,
the LED of the key corresponding to the currently selected
bus will blink, and the LED of keys corresponding to
selectable buses will light. For MATRIX buses, the [9]–
[16] keys will be dark and cannot be selected.
,
Display
• • • • • • • • • • • • • • • • • • • • • •
In this display you can view and edit all mix parameters,
as well as various settings.
Use the DISPLAY ACCESS section (
→ p. 19) to select the
screen that you want to view. Then use the cursor keys of
the data entry section (
→ p. 22) to move the cursor to the
desired parameter, and use the dial or the [INC][DEC]
keys to edit the value.
.
Stereo meter / Cue section
• • • • • • • •
In this section you can view the level of the STEREO
channel or cue monitor.
1 Stereo meter
This is a 32-segment LED meter that indicates the L/R
channel levels of the STEREO channel.
While the [CUE] key of any channel is on, this meter will
indicate the cue monitor level.
B CUE LED
This LED will blink while the [CUE] key of any channel
is on.
C [CUE CLEAR] key
This key clears all cue monitoring that is currently active.
1
1
2
3