Yamaha LS9 - Manual (Page 18)

Top panel
18 LS9-16/32 Owner’s Manual
c
STEREO MASTER section
• • • • • • • • • • •
In this section you can operate the main parameters of the
STEREO channel.
1 [SEL] key
This key selects the STEREO channel as the target of
operations. The L-channel and R-channel will be alter-
nately selected as the target of operations each time you
press the [SEL] key.
B [CUE] key
This key cue-monitors the STEREO channel. When cue is
on, the LED will be lit.
C [ON] key
This switches the STEREO channel on/off. When on, the
key LED will light. In SENDS ON FADER mode, you can
use this as an on/off switch for MIX/MATRIX channels or
as an on/off switch for the signal sent from the STEREO
channel to the MATRIX buses, depending on the LAYER.
D Fader
This adjusts the output level of the STEREO channel. In
SENDS ON FADER mode, this adjusts the level of the
MIX/MATRIX channels or the send level from the STE-
REO channel to the MATRIX buses, depending on the
LAYER.
v
USER DEFINED KEYS section
• • • • • • • • •
Here you can execute the functions that are programmed
for the user-defined keys.
1 User-defined keys [1]–[12]
These keys execute the functions that have been pro-
grammed for each key (e.g., switching scenes, turning
talkback or the internal oscillator on/off).
1
2
3
4
• If you turn on MONITOR ON MASTER FADER in the USER
DEFINED KEY SETUP screen, the [ON] key and fader will respec-
tively turn MONITOR on/off and control its level.
HINT
1