Yamaha LS9 - Manual (Page 22)

Top panel
22 LS9-16/32 Owner’s Manual
I EQ [HIGH] key
J EQ [HIGH MID] key
K EQ [LOW MID] key
L EQ [LOW] key
These keys select the band controlled by encoders 6–8.
By simultaneously pressing the EQ [HIGH] key and EQ
[LOW] key, you can reset the gain of all four bands to 0
dB.
M [HOME] key
This key returns the state of the LS9’s panel to home posi-
tion. When you press this key, the panel will change as fol-
lows.
• The display will show the SELECTED CH VIEW
screen for the currently selected channel.
• The channel level function will be assigned to the fad-
ers (SENDS ON FADER mode will be defeated).
⁄1
Data entry section
• • • • • • • • • • • • • • •
This section lets you edit specific parameters in the screen.
1 [DEC]/[INC] keys
These keys increment or decrement the value of the
parameter at which the cursor is located in the screen, in
steps of -1/+1.
B Cursor keys
These keys move the cursor up/down/left/right in the
screen.
C Dial
This dial continuously increments or decrements the value
of the parameter at which the cursor is located in the
screen.
D [ENTER] key
This key is used to switch a button in the screen on/off, or
to confirm a change you make.
⁄2
USB connector (side panel, to the right
of the display)
• • • • • • • • • • • • • • • • •
This connector lets you connect USB memory.
1 USB connector
USB memory can be connected here, and used to save or
load internal data. User authentication key data to define
the user level can also be saved on USB memory and used
to restrict the functionality that is available to each user.
1
4
2
3
■ USB memory format
Only USB memory that is 2 GB or less in capacity
and is formatted in FAT12, FAT16, or FAT32 is sup-
ported. If the USB memory is formatted in any
other way, you must reformat it in the USER SETUP
screen.
■ Write protection
Some USB memory has write protection that prevents
data from being erased inadvertently. If your USB memory
contains important data, we suggest that you use its write
protect feature to prevent accidental erasure.
Conversely, you must make sure that your USB memory’s
write protect feature is disabled before you attempt to
save data to it.
1
• Operation is guaranteed only for USB flash memory.
NOTE
• The ACCESS indicator will appear in the upper part of the
screen while data is being accessed, such as during saving,
loading, or deleting. During this time, you must not discon-
nect the USB memory from the USB connector or power-off
the LS9. Doing so may damage your USB memory, or damage
the data in the LS9 or in the USB memory.
CAUTION