Metrohm 766 IC Sample Processor - Manual (Page 42)

4.1 Fundamentals of operation
766 IC Sample Processor
37
4.1.3 Overview of key functions
Key Normal state Edit mode
CONFIG
Open the configuration menu
• The key opens the
selection menu for the configura-
tion of the 766 IC Sample Proces-
sor.
• The settings in the configuration
menu remain constant until they are
changed or the working memory
(RAM) for the configuration settings
is re-initialized.
Select configuration settings
• When the configuration menu is
open, pressing the
key displays the next menu line.
• After the last line is displayed, the
first one follows.
• exits the menu.
PARAM
Open the parameter menu
• The key opens the
selection menu for the changer
settings.
• All settings that are set in the
parameter menu belong to a
method and will be saved with the
method. These parameters are
method-specific.
Select method parameters
• When the parameter menu is open,
pressing the key dis-
plays the next menu line.
• After the last line is displayed, the
first one follows.
• exits the menu.
USER
METHOD
Open the user method menu
• The key opens
the selection menu for the loading,
saving and deletion of user-defined
methods.
Select method functions
• When the user method menu is
open, pressing the
METHOD> key displays the next
menu line.
• After the last line is displayed, the
first one follows.
• exits the menu.
HOME
Bring lift to zero-position
• The key runs the lift with
the needle to the zero-position
(0 mm), i.e. to the upper stop.
Select the first line of a menu
• With the key, the first
line in a menu or a sequence can
be accessed.
• Any data that has been altered in a
menu or command line is not car-
ried over (see key).