Metrohm 766 IC Sample Processor - Manual (Page 25)

2 Installation
766 IC Sample Processor
20
2.4.3 IC system without suppression
The 766 IC Sample Processor is connected to an IC system without
suppression consisting of 732 IC Detector, 733 IC Separation Center
and 709 IC Pump as shown in Fig. 11 using the 6.2141.110 cable. With
this interconnection the standard methods 'PC' , 'PC Seg' , 'SP' and
'SP Seg'
can be used (see section 4.6).
732
733
709
766
Fig. 11: Interconnection with IC system without suppression
2.4.4 IC system with suppression with 766 as "Master"
The 766 IC Sample Processor is connected to an IC system with sup-
pression consisting of 732 IC Detector, 733 IC Separation Center, 709
IC Pump and either 752 Pump Unit or 753 Suppressor Module as
shown in Fig. 12 using the 6.2125.120 adaptor. With this interconnec-
tion, in which the 766 IC Sample Processor is the "Master", the standard
methods 'SP' and 'SP Seg' can be used (see section 4.6).
732
733
709
766
753
752
Fig. 12: Interconnection with IC system with suppression with
766 as "Master"
6.2125.090 cable
6.2125.090 cable
6.2125.060 cable
6.2125.060 cable
6.2141.110 cable
6.2141.110 cable
6.2125.120 adaptor
6.2143.200 cable 6.2143.210 cable
6.2125.090 cable