4 methods, 5 "tracing – Metrohm 766 IC Sample Processor User Manual
Page 36
3.4 Methods
766 IC Sample Processor
31
3.4
Methods
USER
METHOD
TOWER
SELECT
•
Now open the user method menu by pressing
methods
>recall method
•
Press
>recall method
method:
∗∗∗∗∗∗∗∗
∗∗∗∗∗∗∗∗
•
Choose
'SP'
with the
with the 766 IC Sample Processor as "Master" from which you can
learn the basic sample changer commands.
•
After you have confirmed loading the method with
name of the method appears in the upper left corner of the display.
You can now use the TRACE function to run the method in steps to
understand how it works (see section 3.5).
3.5
"Tracing"
7
SAMPLE
<2>
•
Before you begin tracing, set the position of the first sample with the
SAMPLE command. Press
manual operation
SAMPLE: = 1
•
Press <2> and
PARAM
<3>
•
Now press to open the parameter menu. All parameters
and sequences that are stored with methods can be found here.
parameters
number of samples: rack
•
The first menu entry defines the number of sample tubes (without
the special beakers) that are to be treated in a series. Here you can
choose between
'rack'
(= a sample rack that is partially or com-
pletely filled, only positions with a sample tube are counted) and
'*'
(= infinite number of samples) with
learning sequence, enter
'3'
on the keyboard. It is also possible
here, as with the other parameters, to enter data manually or use the
"select" choice.