Metrohm 766 IC Sample Processor - Manual (Page 136)

6.8 Standard equipment
766 IC Sample Processor
131
Quant. Order No. Description
1 6.2142.010 Keyboard
for 766 IC Sample Processor
1 6.2621.060 Open-end spanner 5 ⁄⁄
16
"
2 6.2621.090 Open-end spanner 1 ⁄⁄
2
"
1 6.2621.100 Allen key 3 mm
For Allen screws on sample rack
and for splash protection
1 6.2624.000 Steel needle
For aspiration of solutions from
sealed sample tubes
1 6.2743.050 PP Sample tube (11 mL)
For 6.2041.430 sample rack;
set of 2000
2 6.2743.060 PE Cap
For sealing the 6.2743.050 sample tubes;
set of 1000
1 6.2744.010 PEEK Compression fitting
For the connection of 6.1831.0X0 PEEK cap-
illaries or 6.1803.0X0 PTFE capillaries;
set of 5
26
1 6.2744.030 PEEK Coupling
Connection between 6.2744.010 PEEK com-
pression fitting and 6.1826.0X0 pump tubing;
set of 4
1 6.2751.040 Splash protection
Must be installed at the tower of the 766 IC Sample Processor.
1 6.2752.010 Plug cover
Must be installed at the 766 IC Sample Processor.
1 6.2755.000 Tubing cartridge
For peristaltic pump at 766 IC Sample Processor
63
20
150
1.5
SW3
94
147
25